Norcold · 1200-series absorption refrigerators

no coNo cooling detected

The cooling unit did not produce the expected temperature drop. A second occurrence is not owner-serviceable.

Published by RV Fault Finder · Independent referencePrimary source checked August 2026How this guide is researched →
What it means

Plain-English answer

The refrigerator controls stopped the active heat source after failing to detect adequate cooling. Norcold allows basic checks before the first reset; after the code returns, service is required.

Owner-safe checks

What to check first

  1. 01

    Check that exterior refrigerator vents are not blocked.

  2. 02

    Close the doors fully and confirm the RV is level within the limits in the owner manual.

  3. 03

    For the first occurrence only, turn the refrigerator off and back on as described by Norcold.

Safety boundary

Stop and call a technician when

  • The code appears a second time after the reset.
  • You smell ammonia or see yellow powder or liquid near the cooling unit; turn it off and keep away.
Primary reference

Check the exact manual

Applicability: 1200-series absorption refrigerators. The data plate and specification letter determine which procedure is correct.

Open Norcold 1200-series owner's manualSource reviewed August 2026